# dec/28/2020 23:03:02 by RouterOS 6.48
# software id = K375-H8RQ
#
# model = RBD52G-5HacD2HnD
# serial number = D7180CBB5F17
/interface ethernet
set [ find default-name=ether1 ] name=ether1-primary
set [ find default-name=ether2 ] name=ether2-primary
set [ find default-name=ether5 ] name=ether5-primary
set [ find default-name=ether3 ] name=ether3-primary
set [ find default-name=ether4 ] name=ether4-primary
/interface bridge
add admin-mac=48:8F:5A:CC:DF:01 auto-mac=no comment=Primary name=\
    bridge-primary
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
    distance=indoors frequency=auto installation=indoor mode=ap-bridge name=\
    wlan24-primary ssid=MikroTik-CCDF05 station-roaming=enabled \
    wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=\
    wifi-techteam supplicant-identity="" wpa2-pre-shared-key=SECRETPASSWORD
/interface wireless
set [ find default-name=wlan2 ] band=5ghz-n/ac country=australia disabled=no \
    distance=indoors frequency=auto installation=indoor mode=ap-bridge name=\
    wlan50-primary radio-name=TechTeam-ap01 security-profile=wifi-techteam \
    ssid=CMSTechTeam station-roaming=enabled wireless-protocol=802.11 \
    wps-mode=disabled
/interface bridge filter
add action=drop chain=forward dst-port=4321 ip-protocol=udp mac-protocol=ip
add action=drop chain=forward dst-port=9998 ip-protocol=udp mac-protocol=ip
add action=drop chain=forward dst-port=319-320 ip-protocol=udp mac-protocol=\
    ip
add action=drop chain=forward dst-port=8708 ip-protocol=udp mac-protocol=ip
/interface bridge port
add bridge=bridge-primary interface=ether2-primary
add bridge=bridge-primary interface=ether3-primary
add bridge=bridge-primary interface=ether4-primary
add bridge=bridge-primary interface=ether5-primary
add bridge=bridge-primary interface=wlan24-primary
add bridge=bridge-primary interface=wlan50-primary
add bridge=bridge-primary interface=ether1-primary
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge-primary list=LAN
/ip address
add address=192.168.16.30/24 comment=Primary interface=bridge-primary \
    network=192.168.16.0
/ip firewall filter
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
    connection-state=established,related
add action=accept chain=forward comment=\
    "defconf: accept established,related, untracked" connection-state=\
    established,related
add action=accept chain=input comment=\
    "defconf: accept established,related,untracked" connection-state=\
    established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
    invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
    "defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
    in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
    ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
    ipsec-policy=out,ipsec
add action=drop chain=forward comment="defconf: drop invalid" \
    connection-state=invalid
add action=drop chain=forward comment=\
    "defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
    connection-state=new in-interface-list=WAN
/system clock
set time-zone-name=Australia/Sydney
/system identity
set name=ap01
#error exporting /tool graphing
#interrupted